LCD power supply tester introduction:

1: Support 20Pin, 24Pin ATX interface

2: Support SATA interface

3: Support 4Pin, 8Pin interface

4: Support PCI-E graphics card 6Pin interface

5: Support floppy drive interface 6: Support ATE hard disk interface

7: Test voltage has +3.3V, -12V, +5VSB, +12V1, +12V2, +5V and PG time value

Material: Aluminum alloy. Size: 126x64x18.5mm. Weight: 120g

Features: LCD display output voltage and PG and other parameters, when each parameter exceeds the normal value, the buzzer will sound a warning sound, and the corresponding value will flash.

Overview: The liquid crystal display power tester is a powerful power test device. This power tester only needs to be connected to the ATX connector of the power supply to easily and intuitively know whether the output of each power supply is normal. It can detect ATX, BTX, ITX, TFX computer power supply, and can display various voltage and PG values in liquid crystal to quickly detect the performance of computer power supply.

The third generation is LCD liquid crystal display, the output voltage is directly seen

It can measure the voltage of each group of power supply 3.3V/+5V/+12V/-12V/SB+5V/PG

If there is any defect, the buzzer will automatically alarm.

It can also measure the output wire P4/P6/P8/SATA/IDE, and the external DIE/SATA/P6/P8 is the light display, there is no LCD voltage. Only the 24pin or 20pin will have the LCD voltage.

The compact and practical power tester now has more and more power output groups. As long as one of the problems occurs, the hardware of the computer system may not work properly or even burn out. To measure whether the output voltage output of the power supply is stable, the player usually uses a multimeter. But for the average user is still a little troublesome. For the power supply sales market, we can't judge the quality of the power supply. The portable computer power tester has LCD intuitive and accurate display voltage (+/-0.01V), automatic fault alarm, complete test interface, small and beautiful appearance, and test function. More features. It is the best choice for quickly detecting PC power. It is your most reliable helper. More and more groups are coming out. As long as one of them has problems, the hardware of the computer system may not work properly or even burn out related accessories. To measure whether the output voltage output of the power supply is stable, players usually use a multimeter, but it is still a little trouble for the average user. This power tester only needs to be connected to the power supply ATX connector to easily and intuitively know whether the output of each power supply is normal. Power Star Power Tester is a powerful power test device that can detect ATX, BTX, ITX, TFX computer power supply, and can display various groups of voltage and PG values in the LCD, and quickly detect the computer power supply to facilitate the instrument.

◆Support 20Pin, 24Pin ATX power supply
◆Support SATA power supply
◆Support P4 4Pin, 8Pin interface
◆Support PCI-E graphics card 6Pin power interface
◆Support molex/Xeco power interface
◆Support floppy drive power interface
◆Support standard 4Pin power interface SATA interface
◆Test Voltage is +3.3V, -12V, +5VSB, +12V1, +12V2, +5V
◆Material: Aluminum
◆ Size: 89x63.7x17.5mm
◆Features: PG automatic alarm, LCD shows the voltage of each volt

Operation method:

A. Plug the power supply 20PIN or 24PIN and P4, P6 or P8 into the corresponding position of the power tester. (If you plug in the 20PIN or 24PIN interface tester alarm and display LL, you need to plug in 4P! Please be sure that 4P must be inserted in the 4P position!)

B. Turn on the power and “drip” sounds two sounds. If the values of each group are not flashing, it means that the power input is normal.

C. If a circuit voltage signal is not detected (such as 20PIN or 24PIN connector) or the detected voltage is out of the normal range, the buzzer will sound a "drip" warning for a long time, and the corresponding voltage or PG value will be displayed. If the status is flashing, it means the power supply is faulty!

Specification:

Voltage input: 20/40PIN (ATX power supply)

Voltage detection: +12V -12V +5V -5V +3.3V 5VSB 12VPG

Connection port: Floppy HDD COROM SATA 4pin (P4) 8pin (Dual-CPU) 6pin (PCI-E)

Note: Some customers have reported that the +3.3V lamp plugged into the SATA interface tester does not light, because the power SATA interface on the market now has 4 wires and 5 wires! First, make sure that your power SATA interface is 4 lines or 5 lines. If there are 4 lines, there is no +3.3V output, and 5 lines have +3.3V output.

Special reminder: Do not hot plug when using! This is the basic common sense! !

Any power supply voltage or PG problem will alarm and display the voltage value, which solves the problem that the first generation tester has a low voltage test. Very convenient, it is a rare testing tool for power sales personnel and merchants!

Product Display